Comparing TEEHO Smart Locks: Biometrics, Keypads, and Gateway Specs

Best for: Dedicated standalone exterior deadbolt replacements

Pros

• 365-day battery life
• 20 custom passcodes
• Automatic handing detection
• Weather-resistant IP54

Cons

• Lacks biometric scanner
• Incompatible with 38mm holes

The TEEHO TE001 Keyless Entry Deadbolt provides focused, offline electronic deadbolt functionality for standard exterior doors. Engineered with an aluminum alloy chassis and an IP54 weather-resistance rating, the housing shields internal motor components against wind-driven moisture and dust. Its illuminated numeric keypad permits visibility in dim conditions, while physical security relies on a solid motorized deadbolt cylinder.

Mechanically, the TE001 fits standard 2-1/8 inch (54mm) door face holes and is strictly incompatible with 38mm bore holes. The electronic controller accommodates 20 family passcodes alongside a single-use code that erases automatically after one operation. When comparing physical numeric interfaces, reviewing our august lock keypad guide illustrates common button spacing dynamics. The lock offers automatic locking from 10 to 99 seconds and one-touch locking via a two-second key press.

Power comes from four AA alkaline batteries providing up to 365 days of operation, with a red LED alert indicating when power drops below 15 percent. During setup, an automated calibration routine senses bolt resistance to detect door swinging handing. The TE001 suits homeowners wanting straightforward standalone PIN access, but it yields to the TE002 when biometric scanning is required.

• Stores 20 user passcodes and one auto-deleting temporary visitor PIN
• Configurable 10 to 99 second auto-lock timer with one-touch locking
• IP54 weather-resistant aluminum alloy build with anti-peep passcode masking
• Requires 2-1/8 inch (54mm) bore hole with automatic door handing calibration

Best for: Rental hosts needing app access and logs

Pros

• KK Home App management
• 100 user passcodes
• IP55 weather rating
• Optional G1 Wi-Fi bridge

Cons

• G1 Gateway sold separately
• No fingerprint scanner

The TEEHO TE019 Smart Keypad Door Lock combines an electronic keypad deadbolt with an integrated zinc alloy pull handle. Unlike the brand’s offline locks, the TE019 integrates local Bluetooth to pair with the KK Home App on iOS and Android devices. This enables remote passcode distribution, temporary scheduling for service personnel, and local access event tracking.

The lock holds an ANSI Grade 3 rating and achieves an IP55 weather-resistance certification. Stored credentials are protected with AES-128 local data encryption, anti-peeping random digit entry, and an audible lockout alert triggered by 10 incorrect PIN attempts. The internal assembly includes a manual thumbturn and a passage mode switch that suspends the 10 to 180-second auto-lock for unrestricted room access.

Adding the optional TEEHO G1 Wi-Fi Gateway enables remote locking, unlocking, and voice management via Amazon Alexa and Google Assistant. The adjustable mechanical latch supports 2-3/8 inch (60mm) and 2-3/4 inch (70mm) backsets on doors measuring 1-3/8 to 2 inches thick. The TE019 is ideal for rental property hosts, yielding to the TE002L when quick biometric entry is preferred over app-based unlocking.

• Supports KK Home App access, 100 passcodes, and timed guest credentials
• Grade 3 certified with IP55 weather resistance and AES-128 encryption
• Adjustable 60mm or 70mm latch backset for doors 1-3/8 to 2 inches thick
• Optional TEEHO G1 Gateway enables Wi-Fi control and voice assistant commands

Best for: Homeowners wanting fast standalone fingerprint entry

Pros

• 3-second fingerprint recognition
• 20 biometric print slots
• BHMA Grade 3 certified
• Dedicated away security mode

Cons

• No mobile app connectivity
• Handle hardware not included

The TEEHO TE002 Fingerprint Deadbolt with Keypad integrates an active biometric scanner above its numeric keypad. This standalone deadbolt fits standard 2-1/8 inch (54mm) door bores without requiring additional drilling. It provides keyless access via fingerprints, keypad PINs, single-use visitor codes, and physical SC1 backup keys.

Biometric authentication uses an adaptive algorithm that reads prints in 0.3 seconds and retracts the deadbolt in 1 second. The scanner stores up to 20 unique fingerprints and 20 numeric passcodes directly on internal memory. For supplementary perspective on digital latch mechanics, our tapo deadbolt smart lock review outlines baseline cylinder operations. Security features include away mode to suspend temporary codes, silent mode to mute keypad beeps, and anti-peeping digit randomizers.

Constructed from aluminum alloy with BHMA Grade 3 certification and IP54 environmental ingress protection, the TE002 operates up to 365 days on four AA batteries. A red light flashes when battery reserves drop below 15 percent. This model is ideal for residential entrances prioritizing rapid one-touch entry, though users needing matching lower passage hardware should choose the TE002L.

• Biometric sensor with 0.3-second recognition and 1-second deadbolt unlocking
• Local memory holds 20 unique fingerprints and 20 keypad passcodes
• BHMA Grade 3 certified aluminum alloy housing with IP54 water resistance
• Away mode, silent mode, and anti-peep digit entry protection

Best for: Single-bore interior garage and office doors

Pros

• Integrated reversible lever handle
• Passage and privacy modes
• ANSI Grade 3 certified
• 10-attempt tamper shutdown

Cons

• No separate deadbolt throw
• Lacks biometric scanning

Designed for doors with a single bored opening, the TEEHO TE004 Keyless Entry Door Lock houses an illuminated numeric keypad directly on a reversible zinc alloy lever handle. Measuring 2.7 inches long by 6.2 inches wide, this unit replaces standard exterior or interior keyed doorknobs on utility entries, offices, and garages lacking an upper deadbolt cutout.

The lock stores up to 20 user PIN codes and supports single-use temporary passcodes that auto-delete after entry. Auto-lock is enabled by default with an adjustable timer ranging from 10 to 99 seconds, or users can hold any key for two seconds for one-touch locking. A built-in passage mode temporarily disables auto-locking for high-traffic rooms, while interior privacy mode locks out external entry codes via the thumbturn.

Rated ANSI Grade 3 with an IP54 weather-resistance enclosure, the TE004 includes a reinforced lock cylinder and a tamper shutdown that freezes the keypad for 3 minutes after 10 invalid entries. The adjustable latch fits 2-3/8 inch or 2-3/4 inch backsets on doors from 1-3/8 to 2 inches thick. While suitable for interior access points, high-risk exterior doors benefit more from deadbolt models like the TE001.

• Single-bore lever architecture with reversible handle orientation
• Stores up to 20 user PIN codes with single-use auto-deleting guest codes
• ANSI Grade 3 solid zinc alloy construction with IP54 weather resistance
• Passage mode, interior privacy thumbturn, and 3-minute tamper lockout

Best for: Front doors needing deadbolt and lever matching

Pros

• Includes deadbolt and dual levers
• 3-second 3D fingerprint recognition
• 20 fingerprint memory slots
• IP54 weather resistance

Cons

• 1-year warranty coverage
• No wireless app control

The TEEHO TE002L Fingerprint Door Lock bundles an electronic biometric deadbolt with a matching pair of reversible mechanical lever handles. This three-piece package provides complete exterior entryway replacement hardware, ensuring consistent matte black styling across both the upper deadbolt and lower latch openings.

The motorized deadbolt features a 3D biometric fingerprint scanner with an advertised 99.99 percent recognition rate, reading enrolled fingerprints in 0.3 seconds and opening the door within 1 second. The lock stores 20 fingerprints and 20 user passcodes between 4 and 10 digits in length. Those reviewing standard deadbolt bore alignments can also consult our kwikset keyless entry door lock smart breakdown for measurement examples.

The deadbolt and handles are ANSI Grade 3 certified, feature IP54 weatherproofing, and run for over one year on four AA batteries. Entering 10 incorrect passcodes disables keypad inputs for 3 minutes. The TE002L delivers an all-in-one biometric and handle package for front entrances, but it lacks the mobile app connectivity found on the TE019.

• Includes 3D biometric fingerprint deadbolt and two matching lever handles
• Recognizes fingerprints in 0.3 seconds with 1-second deadbolt retraction
• Stores 20 fingerprints, 20 keypad passcodes, and single-use guest PINs
• ANSI Grade 3 certified with IP54 rating and 3-minute tamper lockout

Best for: Exterior entrances needing decorative front handlesets

Pros

• Full exterior grip handleset
• Adjustable lower handle hole
• ANSI Grade 3 certified
• Passage mode functionality

Cons

• No biometric fingerprint reader
• No wireless or app integration

The TEEHO TK001H Keyless Entry Door Lock combines an electronic keypad deadbolt with a full exterior grip handleset and matching interior lever. Engineered for primary front entrance doors, this set upgrades standard dual-bore entry doors with electronic keypad convenience while retaining traditional handleset styling.

The lock provides four unlocking methods: 20 user passcodes, two physical SC1 backup keys, temporary single-use codes, and an unlocked passage mode. The lower handle features an adjustable mounting hole that accommodates variable pre-drilled bottom hole spacing on American doors. Auto-lock engages between 10 and 99 seconds (disabled by default), supplemented by one-touch external locking.

Constructed from aluminum and zinc alloy, the TK001H meets ANSI Grade 3 standards and holds an IP54 weather resistance rating. It includes anti-peeping digit randomizers and an anti-cracking lockout triggered after 10 failed entries. Powered by four AA batteries lasting up to one year, the TK001H suits front entrances needing a full handleset without requiring biometric scanners or smart home hubs.

• Complete front door set with keypad deadbolt, exterior grip, and interior lever
• Adjustable bottom handle mounting hole for pre-drilled door holes
• ANSI Grade 3 certified aluminum and zinc alloy build with IP54 rating
• Supports 20 user passcodes, single-use codes, and passage mode