Pit Boss Pellet Grill Accessories: Compatibility and Spec Breakdown

Best for: Grillers monitoring internal meat temperatures

Pros

• 1000 °F probe rating
• 9-inch immersion reach
• Direct 3.5mm plug-and-play

Cons

• Incompatible with vertical smoker controllers
• Hand wash only

The 2-Pack Meat Thermometer Replacement for Pit is an external thermal sensing solution designed exclusively for horizontal digital thermostat controllers equipped with a dedicated 3.5 mm auxiliary port. Featuring a wired connectivity design, each assembly incorporates a high-grade stainless steel temperature probe linked to an insulated braided lead. The electrical architecture provides plug-and-play telemetry without requiring board calibrations or adapter pigtails. The probe shaft allows an immersion depth of 9 inches, providing sufficient reach to sample thermal cores on large briskets, pork shoulders, and whole poultry carcasses without resting near hot metal grates.

Thermal tolerances are separated into probe and cable thresholds to handle the harsh environment of a convection wood-fired pit. The food contact probe tip is rated to endure ambient cooking temperatures up to 1000 °F (500 °C), while the flexible stainless steel cable is rated for continuous exposure up to 718 °F (380 °C) with a lower operational range threshold of 380 °F. Although the listing specifies battery powered operation alongside its waterproof rating, the unit serves as an outdoor wired sensor that relies on the grill controller display to interpret thermocouple data. This pit boss meat probe replacement 3.5mm hardware serves pitmasters who require reliable multi-point tracking during extended low-and-slow cooks, though users needing vertical smoker controller fits must look elsewhere because the 3.5 mm terminal plug is incompatible with non-horizontal circuit configurations.

• Immersion depth measuring 9 inches for deep core internal temperature reads
• Temperature probe tip rated up to 1000 °F (500 °C)
• Stainless steel lead cable heat resistance certified to 718 °F (380 °C)
• Strict compatibility with 3.5 mm horizontal digital thermostat ports

Best for: Cooks frequently swapping pellet wood blends

Pros

• Six heat-resistant magnets
• Tool-free hopper attachment
• Sturdy metal construction

Cons

• Requires 5.8-inch flat mounting space
• Not suitable for curved hopper bases

The Magnetic Pellet Cleanout Funnel for Smoker by VattaFrast addresses the mechanical nuisance of emptying hopper bins when clearing unburned compressed wood fuel. Fabricated from stamped sheet metal with a durable black finish, this helper chute eliminates fuel spillage on concrete patios or turf by establishing an uninterrupted physical trough between the hopper trapdoor and external collection buckets. When changing hardwood varieties such as smoker pellets pit boss smokers consume, or emptying bins to prevent moisture absorption and subsequent auger jams, this chute channels pellets cleanly down the exit path.

Mounting is handled via six integrated heat-resistant magnets embedded into the flange, completely eliminating the need for drilling, brackets, or mechanical fasteners. Dimensional compatibility requires a flat metallic mounting surface of at least 5.8 inches in width surrounding the hopper outlet, with an internal cleanout port capacity designed for dump doors up to 4.5 inches wide. This magnetic pellet cleanout funnel provides an essential utility for owners who rotate hardwood blends regularly, but it yields to fixed catch bins on units that lack flat rear or side hopper walls around the chute.

• Six heat-resistant embedded magnets for tool-free instant mounting
• Heavy-duty formed metal body coated in protective black finish
• Accommodates hopper cleanout trap openings up to 4.5 inches wide
• Requires a minimum flat mounting area of 5.8 inches for secure magnetic hold

Best for: Owners wanting vacuum-free fire pot cleanouts

Pros

• Heavy-duty stainless steel build
• Direct lift-and-dump workflow
• Compact burn pot fit

Cons

• Does not clean outer barrel basin
• Only fits standard circular fire pots

The Ash Remover for Traeger Pit Boss from JINBETTERGRILLPARTS offers a mechanical solution to combustion chamber maintenance. Measuring 3.26 x 3.26 x 4.3 inches and weighing 2.89 ounces, this compact insert rests directly on the base of the fire pot to capture fly ash as pellets combust. By collecting the residual mineral powder during normal cook cycles, it allows owners to lift out accumulated deposits in a single motion rather than hauling out a shop vacuum after every long cook. This clean extraction maintains consistent airflow through the burn pot vents, preventing restricted ignition air from stifling heat production.

Constructed entirely from heavy-duty stainless steel, the insert resists warping, cracking, and oxidation under intense direct-flame fire pot temperatures. The form factor fits standard circular burn pots found across several pellet grill brands, seating snugly without blocking internal igniter rods or primary ventilation holes. This pit boss burn pot ash remover is ideal for high-volume barbecue cooks who need rapid turnarounds between sessions without trailing vacuum cords across the patio. Grills that utilize deep proprietary square fire boxes or drop-down cleanout cups will find less utility in this particular drop-in insert.

• Heavy-duty stainless steel build impervious to high fire pot temperatures
• Compact physical dimensions measuring 3.26 x 3.26 x 4.3 inches
• Direct lift-and-dump extraction design that bypasses electric vacuum cleaners
• Low product weight of 2.89 ounces for simple manual handling

Best for: Pitmasters dissolving baked-on grease and carbon

Pros

• Fast-acting degreasing formula
• Safe on enameled and stainless surfaces
• Unscented 32-ounce spray

Cons

• No manufacturer warranty provided
• Requires reapplication for extreme grease

The Pit Boss 67290 Smoker Cleaner Grill tool provides a dedicated chemical degreasing formula engineered to restore exterior barrel sheen and interior cooking chambers. Packaged in a 32 fluid ounce trigger spray bottle under model number 67290, this unscented formulation is tailored to break the bond of polymerized grease, burnt animal fat, and stubborn carbonized debris. Instead of applying wire brushes that risk stripping factory paint or scratching porcelain surfaces, this liquid formula dissolves baked-on deposits so they can be wiped clean with shop rags or non-abrasive pads.

Chemical maintenance is recommended every 9 to 10 grilling sessions to keep heat shields, enameled surfaces, and stainless steel hardware free from foul-tasting creosote buildup. The cleaner functions effectively across interior barrel walls, exterior lids, domestic ovens, and even auxiliary accessories like a pit boss griddle insert where grease migration requires chemical degradation. This pit boss 67290 cleaner serves pitmasters managing neglected cookers that suffer from thick grease accumulations, although the listing notes that it carries no manufacturer warranty.

• Fast-acting 32 fluid ounce degreasing formula
• Formulated specifically for stainless steel and porcelain-enameled surfaces
• Unscented profile leaves no lingering chemical perfumes in the cooking chamber
• Engineered for scheduled application every 9 to 10 cooking sessions

Best for: Grillers needing extended heat-resistant prep tools

Pros

• Solid wood and stainless construction
• Dishwasher safe components
• Enlarged hanging loops

Cons

• Three-piece set lacks specialty shears
• Wood handles need dry storage

The Pit Boss Grills Soft Touch 3 piece set, cataloged under manufacturer part number 67392 by Dansons, supplies manual food handling tools built with extra-long leverage. The 3-piece kit contains one pair of locking scalloped tongs, one slotted wide spatula, and one silicone basting brush. Each tool features heavy-gauge stainless steel shafts anchored into solid wood handles with soft-touch ergonomic grips, providing heat resistance that shields the operator when reaching across expansive, searing-hot primary cooking grates.

Storage and maintenance are streamlined through enlarged stamped hanging loops at the base of each tool, permitting direct hanging on grill frame tool hooks. Despite containing solid wood handle components, the manufacturer specifies that the set remains dishwasher safe for effortless sanitation after handling raw proteins and sticky basting sauces. This pit boss 67392 tool set fulfills the needs of outdoor chefs looking for rugged, dedicated pit boss pellet grill tools, though cooks who primarily operate ultra-compact pits like a pit boss table top grill might find the extra-long shafts excessively large for compact grates.

• Three-piece collection featuring locking tongs, slotted spatula, and silicone brush
• Heavy-duty stainless steel structural bodies paired with solid wood handles
• Heat-resistant soft-touch handles designed with extra length for operator safety
• Enlarged integrated hanging loops for fast access on grill tool pegs

Best for: Pit Boss 820 and 850 owners

Pros

• Heavy-duty polyester with PVC backing
• Form-fitting tailored cut
• Drawstring locking closure

Cons

• Not compatible with 1100 series
• Lightweight 1.8-pound fabric handling

The Pit Boss 800 Series Deluxe Grill cover, designated by model number 73821, delivers tailored exterior protection for mid-sized barrel footprints. Cut to dimensions of 47.75 inches in height, 59.5 inches in width, and 23.75 inches in depth, the cover supplies full-length, form-fitting protection from the chimney cap to the wheel base. Engineered using heavy-duty polyester backed with an internal polyvinyl chloride (PVC) layer, the composite textile establishes a weather-resistant barrier against torrential rain, sleet, snow, flying grit, and harsh ultraviolet degradation.

Structural fitment encompasses an extensive range of horizontal cookers, including the Pit Boss Mahogany 820 family (models PB820D, PB820D3, PB820XL, PB820FB1, and PB820SC) along with the Sportsman 820 and 850 lines (models PB820SP, PB0820SPW, PB850SPW2, and general compatible chassis code PIT BOSS 75953). The hem integrates a locking drawstring closure that cinches the skirt tightly against horizontal wind uplift, preventing outdoor displacement during storms while protecting external paint from scratching and moisture spotting. This pit boss 73821 grill cover is indispensable for stationary patio cookers, though it yields to smaller tailored covers when protecting downsized equipment such as a pit boss portable grill.

• Form-fitting dimensions measuring 47.75 inches H x 59.5 inches W x 23.75 inches D
• Heavy-duty polyester outer construction reinforced with water-resistant PVC backing
• Locking drawstring closure system to secure the bottom hem against high winds
• Certified fitment for Mahogany 820 and Sportsman 820/850 barrel series