Worx 40V Snow Blower Comparison: Clearing Width, Battery Specs, and Intake Depth

Best for: Clearing elevated decks patio steps and walkways

Pros

• 2-pound lightweight design
• 3-way adjustable throwing
• Foldable storage handle
• Two-speed motor control

Cons

• Limited to 6-inch snow depth
• Narrow 12-inch path

Best for: Homeowners clearing large multi-car driveways and drifts

Pros

• 20-inch clearing width
• 10-inch intake depth
• Dual 6.0 Ah batteries included
• 180-degree rotating chute

Cons

• Heavier walk-behind form factor
• Too wide for narrow steps

The WORX Cordless Snow Blower,40V 20″ Snow (model WG461) represents the brand’s primary single-stage snow machine designed for substantial residential clearing. Engineered around Worx Brushless Motor 2.0 technology, this unit draws from two included 20V 6.0 Ah PowerShare Pro battery packs connected in series to achieve a 40V operating threshold. The front intake housing measures 20 inches wide and 10 inches deep, allowing the machine to ingest significant snow volume in a single pass. The internal rotating auger processes the snow mass and propels it through a tall discharge chute, generating throw distances up to 35 feet to keep discharge clear of adjacent pathways.

Discharge management is controlled directly via a 180-degree rotating chute paired with an adjustable deflector cap, giving operators granular control over snow placement along property lines. Worx specifies that the dual 6.0 Ah battery setup supplies sufficient runtime to clear up to a 15-car driveway in six inches of typical snow on a single charge. The machine measures 20.5 inches deep, 39.4 inches wide, and 49.2 inches high, establishing a stable walk-behind footprint that moves through medium accumulation without requiring excessive operator pushing force. For buyers researching the best worx snow blower 40v option for standard suburban driveways, the WG461 provides dedicated snow processing capabilities that handheld shovels cannot match.

This full-sized single-stage unit gives way to smaller handheld equipment when maneuvering space is restricted. At nearly 40 inches wide across its operational envelope, clearing tight patio steps, multi-tiered entryways, or narrow elevated walkways with the WG461 proves cumbersome. Homeowners with smaller paved footprints or minimal winter storage space will find its physical bulk unnecessary for minor dustings, where smaller tools execute the task with far less handling effort.

• 20-inch clearing width paired with a 10-inch intake depth for single-pass clearing.
• Brushless Motor 2.0 powered by two 20V 6.0 Ah PowerShare Pro batteries.
• 180-degree rotating directional chute with adjustable deflector throwing up to 35 feet.
• Runtime capacity rated to clear up to a 15-car driveway in 6-inch snowfall conditions.

The WORX Cordless Snow Shovel (model WG460) targets tight residential zones, elevated decks, and steep steps where a walk-behind housing cannot easily operate. Utilizing an elongated shaft design with an overall depth of 65 inches, a width of 14.4 inches, and a height of 15 inches, this tool maintains an operating weight of 17.2 pounds. The front auger paddle provides a 12-inch clearing width and is optimized for a maximum snow depth of 6 inches. Driven by an advanced brushless motor, the WG460 includes two 20V 4.0 Ah PowerShare PRO batteries and a dual-port charger, generating 40V DC power to clear driveways sized for two to four vehicles on a single charge.

Directional control on the WG460 is handled by an adjustable front guide system offering three throwing directions that fling displaced snow up to 25 feet away. A dual-speed electronic switch on the primary handle allows users to downshift motor output when working around delicate decking materials or ramp up RPM when cutting through wet slush. The inclusion of a foldable handle allows the 17.2-pound tool to collapse down for vertical hanging on garage storage hooks. When assessing a greenworks snow shovel against the Worx ecosystem, the key operational factor remains how Worx distributes battery weight across the shaft assembly to reduce lower-back strain.

The primary operational limitation of the WG460 appears when drifts surpass its six-inch intake depth. Because it lacks a wide enclosed intake scoop, attempting to push the 12-inch paddle through ten or twelve inches of heavy, crust-topped accumulation causes snow to spill over the top and sides of the housing. In those deep-drift conditions, the machine demands multiple tiered passes from top to bottom, making the walk-behind WG461 the more efficient choice for heavy storms.

• 12-inch clearing width with an optimized 6-inch intake depth profile.
• Brushless motor offering two-speed operational control for variable snow conditions.
• Three adjustable snow throwing directions with discharge reach up to 25 feet.
• Includes two 20V 4.0 Ah PowerShare PRO batteries and dual-port charging hardware.

Best for: Quick cordless dusting of vehicles and porches

Pros

• High 530 CFM air volume
• Quiet 57 dB sound level
• Dual-tube airflow control
• Lightweight 7.7-pound frame

Cons

• Cannot move wet slush
• Lacks mechanical auger

The WORX Cordless Leaf Blower (model WG581.1) serves as an effective dry-powder snow clearing alternative for steps, vehicle windshields, and delicate porch furniture. Powered by two 20V 4.0 Ah batteries yielding 40V DC and 160 watt-hours of capacity, this handheld unit leverages an efficient brushless motor that runs quieter than mechanical augers, registering an operating sound level of just 57 dB. The blower delivers air volumes up to 530 CFM and air velocities reaching 170 MPH, with a listed maximum speed spec of 180 MPH, enabling it to dislodge fresh, uncompacted snow before foot traffic packs it into ice.

Airflow customization is managed through a 3-speed control dial combined with an instant-access Turbo trigger for short bursts of maximum force. The tool also includes a dual-tube air control system: the wide-diameter tube moves high volumes of air across broad open flatwork, while the narrow-diameter nozzle increases air velocity to strip frozen or stuck-on debris from automotive grilles and steps. Weighing only 7.7 pounds with both battery packs installed, the WG581.1 provides fatigue-free maneuvering that mechanical snow blowers cannot replicate during sub-freezing morning vehicle cleanups.

However, the WG581.1 cannot replace an auger-driven snow thrower once temperatures hover around the freezing mark or snowfall turns wet and dense. Air velocity alone cannot dislodge heavy, slushy, or bonded snow layers. For any accumulation exceeding two to three inches of wet precipitation, the air stream simply bounces off the snowpack, requiring mechanical lifting tools like the WG460 or WG461 to clear the surface.

• Brushless motor generating up to 530 CFM air volume and up to 170 MPH air velocity.
• Dual-tube modular assembly for toggling between high air volume and concentrated air speed.
• Quiet 57 dB sound profile suitable for noise-sensitive residential neighborhoods.
• Lightweight 7.7-pound handheld frame powered by two 4.0 Ah PowerShare batteries.

Best for: Continuous clearing near exterior home power outlets

Pros

• Strong 600 CFM output
• No battery charging required
• Ultra-light 6.4-pound body
• Variable speed control dial

Cons

• Tethered by extension cord
• Ineffective in packed snow

The WORX 12 Amp Turbine Electric Leaf (model WG520) provides an alternative clearing dynamic by eliminating battery chemistry constraints entirely. Operating on standard 120V household alternating current, this corded unit draws continuous power through its 12 Amp motor to drive a high-output TURBINE fan assembly. The axial-style fan design produces air volume ratings up to 600 CFM and airspeeds up to 110 MPH, projecting a wide, uniform column of moving air. For property owners maintaining walkways close to an exterior outlet, comparing corded convenience against tools like the senix corded snow shovel highlights the distinct advantage of uninterrupted electric runtimes in extreme cold.

At an operating weight of 6.4 pounds (with product documentation noting 6.5 pounds), the WG520 is the lightest tool in this roundup. It features an inline variable-speed dial positioned directly beside the main handle grip, allowing single-handed throttle adjustments between gentle sweeping around landscaping and full 600 CFM output across paved pathways. Because it draws power straight from an outdoor extension cord, performance remains completely steady over hours of use, bypassing the cell voltage sag that lithium-ion batteries experience as internal temperatures plummet.

The trade-off with the WG520 is cord management and physical range. Cold weather stiffens commercial extension cords, making them prone to tangling, snagging on frozen landscape borders, or catching beneath car tires. Furthermore, while its 600 CFM air output effortlessly clears powdery snow dustings from patios, steps, and vehicles, it lacks an auger mechanism and cannot cut through dense plow wash, packed tire ruts, or wet accumulation deeper than a light layer.

• High-output 12 Amp electric motor driving specialized TURBINE fan technology.
• Delivers up to 600 CFM air volume and 110 MPH velocity for sweeping wide surface areas.
• Variable-speed operational thumb dial designed for seamless one-handed speed control.
• Ultra-lightweight 6.4-pound housing running on continuous 120V corded power.