Troy-Bilt Riding Mower Bagger Comparison: Deck Fit and OEM Specs

Best for: Post-2010 42 and 46 inch decks

Pros

• FastAttach bracket installation
• Top hood sight window
• Vented nylon collection bags

Cons

• Aftermarket reproduction assembly

The shiosheng Replacementpart OEM NO.(19B30031OEM) Double Bagger serves as an aftermarket dual-collection unit engineered for lawn tractors equipped with 42-inch and 46-inch cutting decks manufactured in 2010 and later. Built around replacement part numbers 19A30031OEM and 19B30031OEM, this assembly integrates FastAttach mounting architecture to lock onto the tractor hitch frame without demanding drilling or specialized brackets. The rear framework matches the standard seat-mount layout found across modern Troy-Bilt residential lawn tractors.

Operating capacity measures 6.5 bushels, equivalent to 208 liters or approximately 60 gallons of compressed yard clippings. The dual collection bins utilize vented nylon mesh, which exhausts positive air pressure driven by the spinning mower blades while retaining pulverized clippings inside the compartments. A top-hinged hood structure allows operators to clear filled bags without tilting the driver seat forward, while an integrated sight window permits quick monitoring of grass fill levels before blockages reach the lower discharge chute.

Engineered for high-volume collection, the upper flex tubing provides visible confirmation of grass circulation to help operators pace ground speed through heavy spring growth. While this unit mirrors the footprint of factory equipment, operators managing a mixed brand lineup alongside a craftsman riding mower sharing the 247-prefix chassis will appreciate the direct cross-compatibility on 42-inch and 46-inch platforms.

• Engineered for 42-inch and 46-inch cutting decks built from 2010 to present
• FastAttach rear mounting interface for rapid installation and deck alignment
• Vented nylon collection bags with 6.5-bushel or 208-liter storage volume
• Top-hinged hood profile with an integrated grass level sight window

Best for: Multi-brand fleet deck compatibility

Pros

• Clear observation chute tube
• Integrated top-hinged lid
• Generous 230 liter volume

Cons

• Hardware fits varied deck brackets

The Twin Bagger Fits for Riding Lawn by Gabasinover provides wide replacement cross-compatibility for 42-inch and 46-inch cutting decks built from 2010 onward. This package features a dual-bagger assembly configured to substitute for manufacturer part numbers 19B30031, 19A30031, 19A30034000, 19B70054100, and 19A70054100. It utilizes a heavy-duty rack mount arrangement that bolts directly to the rear frame uprights of the tractor chassis.

Clipping storage is distributed across two reinforced compartments providing a manufacturer-rated capacity of 230.44 liters, which corresponds to the standard 6.5-bushel operating volume. The enclosure measures 34 inches long, 24.2 inches wide, and 22.8 inches tall, delivering a compact rear footprint that maintains tight turning clearance. A dedicated observation tube allows real-time viewing of turf debris entering the hopper, minimizing overfilling incidents that lead to backed-up mower decks.

This attachment features a top-hinged collector hood that swings upward to give unrestricted access to both bag handles, speeding up unloading stops during large yard cleanups. Operators maintaining modern Troy-Bilt hydro and gear-drive machines with 42-inch or 46-inch stamped decks receive standard discharge performance, though users requiring factory-certified structural stampings may look to direct MTD factory parts instead.

• Cross-compatible with OEM numbers 19B30031, 19A30031, and 19A30034000
• High-volume 230.44-liter capacity split across dual-compartment bins
• Observation window and flexible feed tube for continuous airflow tracking
• Integrated carrying handles and buckled closures on heavy-duty bins

Best for: 2020 and newer 36-inch tractors

Pros

• Genuine OEM deck match
• Thermoform bottom collection bags
• Heavy flex discharge tubing

Cons

• Total weight reaches 59.9 pounds

The MTD Genuine Parts Double Lawn Mower attachment delivers factory-approved collection for compact Troy-Bilt lawn tractors fitted with 36-inch cutting decks produced in 2020 and later. Identified by model number 19A30045OEM and manufactured through the Arnold Corporation, this assembly is designed specifically for smaller residential frames where larger 42-inch chutes fail to mate with the discharge opening. Checking the parts list decal under the tractor hood confirms direct compatibility before installation.

This 19A30045OEM double bagger provides 6.5 bushels of clipping capacity using two heavy-duty fabric bags reinforced with rigid thermoform molded bottoms. These solid plastic bases guard the fabric against wear when dragging filled containers across asphalt driveways or rough turf during disposal runs. Integrated grab handles molded into the bag frame ensure straightforward dumping into compost piles or municipal waste bags.

The discharge chute consists of ribbed flex tubing engineered to create a tight aerodynamic seal against 36-inch mower deck discharge ports, generating consistent grass velocity to prevent clogs. The complete factory package weighs 59.9 pounds and measures 41.25 inches long, 24.5 inches wide, and 20 inches high, including all upright mounting brackets, structural hood components, and mounting hardware required for out-of-the-box assembly.

• Tailored for Troy-Bilt 36-inch lawn tractors manufactured from 2020 onward
• Thermoform plastic bottom pans protect collection bags from abrasive ground contact
• Generous 6.5-bushel storage volume matched to compact tractor wheelbases
• Shipped complete with factory mounting brackets, discharge chute, and hardware

Best for: Pony and Bronco 42 or 46-inch decks

Pros

• Direct factory replacement 19B30031GFP
• Broad compatibility across model lines
• Includes complete factory hardware

Cons

• Heavy 59-pound total assembly

The MTD 19B30031GFP 42″ 46″ Double Bagger stands as the official factory-standard bagging assembly for modern Troy-Bilt lawn tractors featuring 42-inch and 46-inch decks. Carrying original manufacturer part number MTD 19B30031GFP, this kit directly supersedes legacy part numbers CMXGZAMB30031, 19B30031OEM, 19B30031791, and 19B30031100. It bolts directly to the rear hitch plate across dozens of modern Troy-Bilt nameplates, including the Bronco, Pony, Horse, and Super Bronco series.

Constructed to strict original equipment tolerances, this troy bilt 42 inch mower bagger unit matches stamped and fabricated deck discharge profiles without requiring airflow baffle alterations. While property owners comparing tractor footprints might cross-shop alternatives against a john deere riding lawn mower setup, Troy-Bilt operators benefit from the specialized mounting uprights in this kit that align perfectly with pre-drilled chassis holes on modern MTD platforms.

The unit measures 41 inches long, 25 inches wide, and 19 inches high, carrying a total shipping weight of 59 pounds. The dual bags distribute grass weight evenly across the rear axle to maintain front-wheel steering traction on rolling terrain. As an authentic troy bilt 46 inch mower bagger solution, its internal chute profile maximizes vacuum velocity to transport dense, damp thatch efficiently into the rear bins.

• Original MTD factory OEM kit replacing 19B30031OEM and CMXGZAMB30031
• Direct bolt-on fit for Troy-Bilt Bronco, Pony, Horse, and Super Bronco models
• Engineered for both 42-inch and 46-inch cutting decks across modern model years
• Complete 59-pound heavy-duty assembly with all factory mounting brackets

Best for: Legacy 2002 to 2009 Troy-Bilt riders

Pros

• Fits older 38 and 42 inch decks
• Bracket accepts suitcase weights
• Lightweight 26.8-pound dry build

Cons

• Incompatible with post-2010 46-inch decks

The Arnold twin collection system, identified under model number OEM-190-180A, is specifically built for older Troy-Bilt and MTD lawn tractors that predate modern FastAttach frames. This OEM-190-180A twin bagger kit attaches to riders equipped with 38-inch cutting decks built from 2002 to present, as well as 42-inch cutting decks manufactured between 2002 and 2009. Mowers manufactured before the 2010 model year redesign require this specific rear bracket geometry to secure the collector uprights.

Equipped with a 6.5-bushel collection capacity, this system uses high-density, tight-weave polyester bags engineered to optimize air permeation while trapping fine particulate dust and allergens. The assembly includes an extra-wide 7-inch diameter discharge chute that substantially reduces mid-tube clogs when processing thick autumn leaves or spring lawn growth. The integrated bag dump straps give operators mechanical leverage when inverting filled bags.

A notable mechanical asset of the Arnold system is the dual-purpose rear frame bracket, which doubles as a suitcase weight mounting rack (counterweights sold separately). Adding rear counterbalance weights helps stabilize lighter lawn tractors when operating on sloped lawns. Weighing just 26.8 pounds, this kit provides a noticeably lighter rear assembly than modern 59-pound factory units while retaining full structural rigidity.

• Engineered for 38-inch (2002+) and 42-inch (2002–2009) mower deck architectures
• Large 7-inch diameter chute improves airflow and reduces grass blockages
• Dual-purpose mounting framework functions as a suitcase weight bracket
• Lightweight 26.8-pound dry build reduces overall stress on tractor transmission

Best for: Recent Pony 36 and 36B mowers

Pros

• Factory replacement for 19A30045OEM
• Direct match for model 13AC77BYA66
• Factory OEM fitment guarantee

Cons

• Limited to select 36-inch platforms

The MTD 19A30045GFP 36″ Double Bagger Troy-Bilt is a genuine factory-produced twin catcher assembly built exclusively for compact Troy-Bilt tractors with 36-inch cutting decks. Bearing OEM part number 19A30045GFP, this unit serves as the factory-authorized replacement for earlier part number 19A30045OEM. It is engineered specifically for smaller residential layouts where larger lawn tractors cannot maneuver through garden gates.

Fitment precision is critical on narrow-track tractors, and this assembly serves as the designated troy-bilt pony grass catcher for models including the Pony 36 and the 2023 Pony 36B (model number 13AC77BYA66). Attempting to mount standard 42-inch bagging kits to these compact frames results in bracket misalignment and improper chute seating. Operators servicing multiple equipment brands who maintain tractors with specialized john deere parts for riding lawn mower setups will appreciate how closely MTD has tailored this kit to their compact chassis geometry.

The assembly weighs 57 pounds and includes a 3-month manufacturer warranty. The heavy-duty polymer hood and high-strength fabric collection bags are balanced to prevent front-end lifting when the twin bins reach capacity. When shopping for a dedicated troy bilt 36 inch lawn mower bagger, selecting part 19A30045GFP guarantees proper deck collar alignment and retains factory vacuum flow across 13AC77BYA66 platforms.

• Original MTD factory OEM part replacing earlier part number 19A30045OEM
• Precision-matched to Troy-Bilt Pony 36 and 2023 Pony 36B (13AC77BYA66)
• Complete 57-pound twin-collection system with factory mounting hardware
• Engineered specifically to balance compact 36-inch tractor chassis layouts