Schlage Strike Plate Dimension and Compatibility Guide

Best for: Standard residential jambs with rounded mortises

Pros

• Factory 1/4-inch radius
• Oil rubbed bronze finish
• OEM Schlage design

Cons

• Does not include dust box

The Schlage 10027613 Oil Rubbed Bronze 1 is an OEM factory replacement designed specifically for standard residential door jambs routed with rounded corner mortises. Measuring 1-5/8 inches wide by 2-1/4 inches high, this plate features a standardized 1/4-inch radius along its perimeter corners, matching standard residential router templates used by door manufacturers. The listing specifies an overall product footprint of 2.25 by 1.6 by 0.3 inches with a lightweight physical profile weighing 0.8 ounces. Finished in an architectural oil rubbed bronze, it coordinates directly with matching dark hardware suites across residential entryways and interior doors.

As a classic schlage full lip strike plate, the extended lip ensures that the spring latch and auxiliary deadlatch bolt engage smoothly without gouging into the painted or stained wood jamb casing during closure. Because this unit is designated under commercial parts and features a full lip configuration without an included strike box, it installs directly over existing factory mortises. Homeowners pairing this unit with standard schlage door knobs will find it drops cleanly into standard residential jamb preps without requiring chisel work.

While the schlage 10027613 excels in standard 1/4-inch radius jamb preps, it gives way to commercial T-strikes when working with square-cut commercial metal jambs or locksets that require an adjustable tab to eliminate door rattle. If your installation involves hollow metal frames or Grade 1 heavy-duty commercial chassis, a T-pattern strike with center tab adjustment is required instead.

• Factory OEM dimensions measuring 1-5/8 inches by 2-1/4 inches
• Curved 1/4-inch radius corners matching standard residential router bits
• Oil rubbed bronze architectural finish for dark hardware suites
• Full lip profile designed to protect decorative jamb moldings

Best for: Heavy-duty commercial frames needing satin nickel

Pros

• Solid brass construction
• Fits Grade 1 and 2
• Includes mounting screws

Cons

• Requires T-strike mortise cutout

The Prime-Line E 2484 Tee Strike delivers heavy-duty latch retention engineered specifically to fit Schlage locksets operating in Grade 1 or Grade 2 commercial and residential environments. Constructed from solid brass and finished in a resilient satin nickel, this strike plate provides superior wear resistance against repeated mechanical latch impacts. The listing indicates overall dimensions of 1.13 by 1.13 by 2.38 inches with a weight of 1.44 ounces, featuring standardized mounting screw holes positioned exactly 2-1/8 inches on center.

Engineered for versatility across both wood and metal jambs, this schlage t strike plate utilizes a classic T-strike geometry characterized by a centered latch opening and an integrated lip projection. The included fastening hardware enables straightforward installation using a standard Phillips head screwdriver, making it an efficient replacement for worn or misaligned commercial strikes. When upgrading hardware with a modern schlage door lever, this solid brass tee strike ensures firm positive latching while maintaining clean alignment with the door stop.

Because the prime-line e 2484 features solid brass construction, it offers higher tensile strength and corrosion resistance compared to stamped steel alternatives. However, it gives way to broader full lip strikes when fitted to doors where the jamb casing sits close to the latch line, as the narrow T-lip may not extend far enough to shield protruding wood trim on deep residential jamb reveals.

• Solid brass base construction with a durable satin nickel finish
• Standard 2-1/8 inch center-to-center mounting hole spacing
• Engineered for compatibility with Grade 1 and Grade 2 Schlage locksets
• Suitable for installation on both wood and hollow metal jambs

Best for: Jambs prepped with round circular mortises

Pros

• 1-3/4 inch circular diameter
• Polished brass finish
• Fast drive-in style install

Cons

• Incompatible with rectangular mortises

The Schlage 10-058 1 3 4″ Diameter offers a specialized geometric solution for pre-hung doors and quick-prep installations that bypass traditional rectangular mortising. Known in the industry as a circular strike plate or bird feeder strike, this genuine Schlage component features a circular base plate with an outer diameter of 1-3/4 inches and an integrated 1-7/32 inch lip extension. The listing notes a polished brass finish and an item weight of 22.68 grams, packaged in a compact 2-inch format.

The mechanical advantage of this schlage circular strike plate lies in its installation simplicity on doors pre-drilled with a standard spade bit or hole saw. Instead of routing a perimeter recess and squaring mortise corners with a chisel, the installer seats the circular collar directly into a round 1-3/4 inch bored pocket in the jamb. The 1-7/32 inch lip projects outward to capture the advancing latchbolt, directing it smoothly into the central latch pocket without catching the edge of the borehole.

While the schlage 10-058 is ideal for rapid replacement in matching round jamb preps, it cannot be used as a drop-in replacement for standard rectangular or T-pattern jamb cutouts without extensive wood patching. Readers with standard rectangular jamb preps should bypass this circular model in favor of full lip or T-strike hardware.

• Circular 1-3/4 inch outer diameter base plate configuration
• Integrated 1-7/32 inch lip projection for latchbolt guidance
• Polished bright brass finish matching traditional interior hardware
• Authentic Schlage residential replacement component

Best for: Grade 2 bronze doors needing latch adjustment

Pros

• Adjustable tab prevents rattle
• Durable stamped steel
• Standard 2-1/8 inch centers

Cons

• Steel base rather than brass

The Prime-Line E 2788 Tee Strike provides a robust stamped steel latch receiver designed for Grade 2 Schlage locksets installed in commercial or residential doorways. Featuring an architectural classic bronze finish, this standard door strike incorporates an adjustable tab inside the bolt pocket that can be bent slightly inward or outward to fine-tune door latch tension. The listing details package dimensions of 1.13 by 1.13 by 2.75 inches, a weight of 1.44 ounces, and mounting holes spaced precisely 2-1/8 inches on center.

The adjustable tab of the prime-line e 2788 solves the widespread issue of door chatter caused by loose weatherstripping or settled door frames. By inserting a screwdriver into the latch pocket, installers can adjust the resistance point to hold the door firmly against the jamb stop, ensuring that the deadlocking plunger on Schlage latches remains depressed when the door is shut. When retrofitting exterior doors or thick entry assemblies equipped with a schlage thick door kit, having an adjustable tab allows for precise calibration against varying gasket pressures.

This stamped steel strike is compatible with both wood and metal jambs, and it includes all necessary mounting fasteners for quick assembly using a standard screwdriver. It gives way to solid brass models like the E 2484 in environments requiring Grade 1 architectural specifications or where marine-grade corrosion resistance is prioritized over stamped steel.

• Stamped steel construction with a classic bronze plated finish
• Integrated adjustable tab to correct door rattle and latch tension
• Industry standard 2-1/8 inch center-to-center hole spacing
• Engineered for Grade 2 commercial and residential locksets

Best for: Polished brass Grade 2 lockset retrofits

Pros

• Bright brass plated finish
• Bendable adjustment tab
• Standard 2-1/8 inch centers

Cons

• Limited to Grade 2 specs

The Prime-Line E 2467 Schlage is a stamped steel T-strike engineered specifically to support Grade 2 Schlage locksets mounted in both wood and metal door frames. Featuring a bright brass plated finish, this model combines a standard T-strike profile with an adjustable tab inside the latch opening to calibrate the door resting position against the stop. The listing specifies an item model number of E 2467 and confirms the critical 2-1/8 inch center-to-center mounting hole dimension.

This model provides an effective replacement when existing brass strikes become worn, gouged, or loose after years of latch cycling. The prime-line e 2467 includes standard mounting hardware, allowing immediate fastening with a hand screwdriver. Because the adjustable tab can be repositioned using standard hand tools, technicians can eliminate play between the latchbolt and the strike lip, preventing drafts and maintaining deadlatch engagement without having to reposition the screw holes in the jamb.

While the E 2467 shares the same 2-1/8 inch hole spacing and steel construction as the E 2788, it differs exclusively in its bright brass finish. It yields to full lip residential strikes when working on decorative frames routed with rounded corner mortises, as installing a T-strike into a full lip mortise leaves unsightly gaps in the wood surrounding the plate.

• Stamped steel core with a high-luster bright brass plated finish
• Precision 2-1/8 inch on-center mounting hole pattern
• Adjustable internal tab for customized latch engagement
• Direct compatibility with Schlage Grade 2 residential and commercial locks

Best for: Concealing mortises behind Schlage full lip strikes

Pros

• Pairs with 10-026 and 10-027
• Durable metal construction
• Clean interior jamb finish

Cons

• Detailed dimensions not specified

The SCHLAGE C603-623 Box for Full Lip is a specialized jamb reinforcement component designed to install directly behind compatible Schlage full lip strikes. According to the listing title, this genuine hardware box is engineered specifically to pair with Schlage 10-026 or 10-027 full lip strike plates, and it is manufactured from metal, with the specific metal composition varying by production batch. The listing does not specify detailed exterior dimensions, exact gauge thickness, weight, or whether mounting screws are bundled in the package.

In standard architectural door preparation, a strike box—also referred to as a dust box—serves both structural and aesthetic roles inside the jamb mortise. Installed directly beneath the strike plate within the latch bolt cavity, the schlage c603-623 conceals rough, unfinished wood cuts or hollow metal cutouts behind the plate, preventing sawdust, insulation, or debris from obstructing the latch mechanism. Furthermore, enclosing the bolt cavity provides a clean finished interior that prevents the latchbolt from rubbing against raw framing timber.

Because the C603-623 is purpose-built as an accessory box for full lip strikes 10-026 and 10-027, it cannot be used as a standalone strike plate. It gives way to dedicated T-strike boxes or open-back installations when using commercial T-strikes such as the E 2484 or E 2788, which feature different bolt cavity dimensions and screw placements.

• Authentic Schlage hardware accessory designed for full lip strikes
• Engineered specifically for compatibility with models 10-026 and 10-027
• Metal construction providing a finished, enclosed latch pocket
• Protects lockbolt operation by preventing jamb cavity debris intrusion