Ninja Smoker Grill Stands Compared: Specs, Sizing & Compatibility

The Grill Stand for Ninja Woodfire Outdoor from GRILL FORCE serves as a direct replacement for the Ninja XSKSTAND platform. It is engineered specifically as a dedicated ninja og700 grill stand for models including the OG701, OG705, OG750, and OG751, while also accommodating compact tabletop cookers like the Blackstone 22-inch griddle and Traeger Ranger. Built with rust-resistant metal legs and a non-warping composite plastic deck, it provides reliable stability during all-weather outdoor cooking.

Two large all-weather wheels and a thick ergonomic handle allow smooth maneuvering over grass, gravel, and patios. When open, the table measures 42.5 inches wide, 13.3 inches deep, and 26 inches high, offering an upgraded adult working height that minimizes back strain. This collapsible stand for ninja woodfire features scissor legs that fold down to 42.5 inches by 11 inches by 13.3 inches for convenient vehicle trunk or RV storage.

A detachable side shelf, removable spice basket, and built-in utensil hooks keep food preparation organized. However, its 13.3-inch depth cannot seat larger OG800 or OG900 Pro XL cookers, which require broader platforms with deeper clearance.

• Engineered specifically for Ninja Woodfire OG700 series grills and 22-inch tabletop griddles
• Collapsible scissor-leg frame folds down to an 11-inch transport profile
• Two large all-weather wheels with an ergonomic handle for turf and gravel transit
• Includes detachable side prep shelf, spice caddy basket, and built-in utensil hooks

Best for: Cooks wanting rapid folding and cooling airflow

Pros

• 20-second suitcase fold
• 200-pound load capacity
• Hollow deck for base heat venting

Cons

• Low 21-inch table height

The 51″ Grill Table Stand with Wheels from Uniflasy offers expansive compatibility across the entire Woodfire series. Fabricated from powder-coated carbon steel, it supports OG700 models, the OG800 and OG900 Pro XL lines (OG701, OG850, OG901, OG951), and OO101 or MO201 pizza ovens. With a 200-pound load rating, this versatile ninja woodfire cart easily supports heavy setups like a ninja grill smoker combo.

A hollow center cutout promotes airflow under the smoker, allowing radiated base heat to dissipate quickly and protecting internal electronics. A raised perimeter edge delivers 360-degree appliance retention to prevent sliding, while upgraded security locks keep the frame rigid during active cooking and folded transit.

The stand features a 20-second suitcase-style fold, dual transport wheels, double side prep shelves, a paper towel bar, and six hanging hooks. It gives way to static bolt-down stands only if you prefer stationary leveling legs over rolling wheels.

• Universal compatibility spanning Ninja OG700, OG800, OG900 Pro XL, and OO101 ovens
• Robust 200-pound load capacity built from powder-coated carbon steel
• Hollow deck cutout enhances underside airflow to prevent base heat buildup
• Suitcase-style 20-second folding design with dual side shelves and 6 hooks

Best for: Patio pitmasters needing multi-tier vertical storage

Pros

• Three adjustable height settings
• Double-tier storage shelves
• Heavy-gauge alloy steel frame

Cons

• Requires bolt assembly to pack

The Adjustable Cart for Ninja Outdoor Woodfire from WEBROIL provides ergonomic height customization and vertical storage. Built from heavy-gauge powder-coated alloy steel, this adjustable cart for ninja outdoor woodfire measures 43.7 inches long by 22 inches wide and offers three height settings from 29.8 to 31.8 inches. Rated for 200 pounds, it fits the OG700, OG800, and OG900 series alongside the MO201 pizza oven as a substitute for the XSKUNSTAND.

Storage is divided across a double-tier shelf layout. The upper level supports the cooker, while the lower rack holds pellet containers and accessories. Equipped with a movable grill caddy, paper towel bar, and six utility hooks, it gives any ninja grill outdoor setup dense, accessible organization.

The three height presets reduce back strain during long smoking sessions. While collapsible, its multi-piece bolt assembly makes breakdown slower than scissor-style carts, making it best suited for backyard cooks prioritizing storage over instant folding.

• Three-position adjustable height settings spanning from 29.8 to 31.8 inches
• Heavy-gauge alloy steel construction supports up to 200 pounds of gear
• Double-tier dual-shelf architecture with movable caddy and paper towel rack
• Compatible across Ninja OG700, OG800, OG900, and MO201 pizza oven models

Best for: Stationary patio setups needing anchored stability

Pros

• Direct bolt-in hex screw attachment
• Adjustable telescoping leg height
• Integrated food prep side table

Cons

• No transport wheels included

The Ninja Outdoor Adjustable Stand with Side is SharkNinja’s official OEM station, model number ninja xskunstandtbl. Built to eliminate third-party sizing concerns, it features a four-leg tubular pedestal and an attached prep side table. Fitment is certified as a dedicated ninja outdoor oven stand and grill platform for the OO101 oven and OG701, OG751, OG850, and OG901 grills across the OG700, OG800, OG900, and OO100 collections.

Unlike universal friction carts, this official stand uses 14 included hex screws and a hex key to bolt appliances directly to the frame. This mechanical lock stops all sliding and rocking when opening heavy lids or scrubbing grates. Pitmasters comparing alternatives like a cuisinart smoker grill will appreciate the stability of Ninja’s bolt-down connection.

The telescoping legs provide height adjustment, and the black weather-resistant finish holds up outdoors. Without wheels, moving it requires lifting or disassembly. It remains the top choice for cooks who want certified factory tolerances and anchored stability.

• Official SharkNinja OEM model XSKUNSTANDTBL with factory-certified fit
• Direct bolt-in mounting with 14 hex screws and included hex key
• Adjustable leg height settings paired with an attached side prep table
• Fits Ninja OO101, OG701, OG751, OG850, and OG901 collections

Best for: Campers wanting a convertible prep table

Pros

• Wide 25.2-inch base support
• Converts to flat picnic table
• Flip-up one-handed paper towel holder

Cons

• Lacks rolling transport wheels

The Hisencn 51 Inch Upgraded Grill Table is a versatile prep island and stand for large outdoor appliances. Measuring 50.9 inches wide, 21 inches deep, and 30.2 inches high, its 20.6-pound alloy steel frame accommodates bases up to 25.2 inches long by 21 inches wide. It fits Ninja OG701, OG850, OG901, OG951, and Pro XL models, as well as outdoor pizza ovens and a blackstone smoker grill combo.

Side wings unfold to widen the prep area, and removing the cooker converts the stand into a flat picnic table. Collapsible legs and thick side carry handles enable balanced lifting into car trunks or RVs without wheeled protrusions catching on gear.

Six heavy-duty utility hooks hold grill tools without bending, while the rotating paper towel holder locks upright for one-handed tearing and folds flat for storage. It gives way to the WEBROIL cart only if you need lower vertical shelf storage.

• Accommodates large grill footprints up to 25.2 inches long by 21 inches wide
• Convertible tabletop transforms from grill base to flat picnic prep island
• Rotating flip-up paper towel bar locks vertical for quick one-handed access
• Collapsible legs with thickened side carry handles for trunk and RV storage