JET Air Filtration Systems Spec Comparison: CFM, Voltage, and Filter Media

Best for: Dedicated production shops running 115V lines

Pros

• Substantial 2097 CFM volume
• 3-speed motor adjustability
• CSA Certified electrical build

Cons

• Heavy 120-pound unit weight

Best for: Heavy industrial facilities with 230V circuits

Pros

• High-output 3367 CFM capacity
• 1 HP motor with overload protection
• MERV 12 REEMAY inner filter

Cons

• Requires dedicated 230V circuit
• 75 dB noise output

Best for: Mid-sized workshops with standard 115V power

Pros

• 1700 CFM airflow rating
• Washable MERV 8 outer filter
• RF remote with 1-9 hour timer

Cons

• 72 dB operating noise level
• 1000 square inch floor footprint

The JET Industrial Air Filtration System (Model IAFS-1700) is engineered for mid-sized fabrication and woodworking facilities requiring substantial air exchanges without upgrading to specialized high-voltage infrastructure. Operating on standard 115V single-phase power, this unit draws through a 1/3 HP fully-enclosed ball bearing motor designed with built-in thermal overload protection. The mechanical blower assembly pushes up to 1700 CFM across three selectable speed settings operating at 640, 940, and 1100 RPM, giving operators precise control over sound levels and air movement rates during different machining processes.

Filtration efficiency centers on a two-stage core configured with a washable resin fiber outer filter rated at MERV 8 and an inner REEMAY WHT filter rated at MERV 12. This arrangement captures fine particles, with the pleated fiber media achieving 99% effectiveness on fumes, oil mist, and water vapor down to 8 to 10 microns. The internal chassis includes an extra slot designed specifically for an optional charcoal filter to eliminate volatile organic compounds and nuisance odors. Unlike residential units like a trucozie air purifier that rely on compact radial fans, this unit utilizes industrial-grade motor windings rated for constant run cycles in demanding environments.

Operational control is managed through radio-frequency remote start and tactile button controls, featuring an integrated timer programmable between 1 and 9 hours for automated post-shift air scrubbing. The heavy chassis spans 36.69 inches in depth, 24 inches in width, and 20.28 inches in height, providing a filter face floor area coverage of 1000 square inches while emitting an operational noise level of 72 dB. The entire system is CSA/US Certified, verifying compliance with strict industrial electrical and mechanical safety standards.

• Dual-stage media combining washable MERV 8 outer filter and MERV 12 REEMAY inner core
• Three operational blower speeds delivering 640, 940, and 1100 RPM
• Radio frequency remote control with automated 1 to 9-hour shutoff timer
• Fully-enclosed ball bearing motor with integrated overload protection

The JET Industrial Air Filtration System (Model IAFS-3000) represents the high-capacity threshold of the industrial air handling line, designed specifically for expansive workshops and commercial machine halls. Powered by a potent 1 HP, 746-watt motor operating on 230V single-phase electrical service, this machine generates an impressive maximum airflow rating of 3367 CFM. The enclosed blower mechanism operates across three calibrated speed modes at 720, 970, and 1100 RPM, circulating massive cubic volumes of air to rapidly clear suspended particulate, metal processing smoke, and ambient wildfire smoke.

Its filtration system utilizes an expanded 1176 square inch floor area profile to maximize air intake surface, reducing static pressure resistance across the pleated fiber filter array. The primary outer layer consists of a washable resin fiber filter at MERV 8, backed by an advanced REEMAY WHT inner filter achieving MERV 12 efficiency. This combination captures 99% of oil mist, vapor, and airborne debris down to 8 microns. An integrated expansion slot accommodates an optional activated carbon panel for aggressive chemical odor capture. Facilities assessing air distribution balance alongside localized climate hardware like an arctic air cooler will find this ceiling-suspended unit moves air overhead without disrupting floor-level cooling drafts.

System monitoring and adjustments are executed via a responsive touch interface and an accompanying radio frequency remote control. The programmable timer offers 1 to 9-hour run intervals, allowing the blower to purge ambient air after operators leave the shop floor before shutting down automatically. The fully-enclosed ball bearing motor is CSA/US Certified and features overload protection against voltage fluctuations. At full operational velocity, the acoustic output registers at 75 dB, reflecting the substantial power of its industrial 1 HP centrifugal blower wheel.

• Maximum high-velocity airflow capacity rated at 3367 CFM
• Heavy-duty 1 HP motor engineered for 230V single-phase industrial circuits
• Touch controls paired with RF remote and programmable 1 to 9-hour timer
• Two-filter system incorporating washable MERV 8 pre-filter and MERV 12 REEMAY core

The JET Industrial Air Filtration System (Model IAFS-2400) provides an intermediate performance tier that optimizes airflow velocity while remaining compatible with common 115V single-phase electrical lines. Outfitted with a durable 3/4 HP fully-enclosed motor, this model draws 2097 CFM of air through its heavy-gauge housing. The three-speed motor runs at 520, 700, and 940 RPM, allowing machine operators to tune airflow rates according to current workshop processes, such as intensive sanding, welding, or CNC milling.

Constructed with an overall item weight of 120 pounds, the structural steel enclosure houses a two-filter system consisting of a washable resin fiber outer filter rated at MERV 8 and a high-density REEMAY WHT pleated inner filter rated at MERV 12. This filtration assembly retains airborne particulate down to 10 microns with 99% effectiveness against processing fumes, oil mists, and fine sawdust. A dedicated auxiliary slot allows the addition of an optional charcoal filter to neutralize persistent odors, cigarette smoke, and chemical vapors. While a compact slevoo air purifier manages residential bedrooms, the IAFS-2400 is strictly built for commercial fabrication environments requiring rigorous CSA Certified components.

The remote-start radio frequency controller allows users to power the system on or off and set the 1 to 9-hour countdown timer from anywhere within the facility. Running at a moderate acoustic output of 71 dB, this model is the quietest among the three industrial air handling chassis, making it particularly advantageous for smaller commercial spaces where motor drone must be minimized. Ball bearing construction and thermal overload safeguard mechanisms ensure long-term continuous reliability without motor winding degradation.

• Balanced 2097 CFM airflow powered by a 3/4 HP 115V single-phase motor
• Low acoustic footprint registering at 71 dB during operational cycles
• Comprehensive two-filter setup with MERV 8 washable pre-filter and MERV 12 REEMAY core
• Heavy-duty 120-pound steel construction certified to CSA standards

Best for: Owners maintaining JET AFS-1000B systems

Pros

• Washable reusable polyester media
• Sturdy galvanized sheet metal frame
• Traps 5-micron particles

Cons

• Only fits AFS-1000B and 1000C

The JET 24x12x1 Washable Electrostatic Outer Air filter (Model 708732 / AFS-1B-WOF) is a precision-engineered direct-fit replacement media designed specifically for JET AFS-1000B and AFS-1000C workshop air filtration systems. Unlike disposable cardboard filters that degrade under moisture exposure, this unit is built with a rugged galvanized sheet metal frame encasing a non-woven pleated polyester filter core. Measuring exactly 24 inches in length, 12 inches in width, and 1 inch in thickness (with metric dimensions of 595mm x 289mm x 22mm), the filter slides directly into the exterior intake channels of compatible machines.

Rated at MERV 11, this electrostatic filter provides 3.23 square feet of pleated media surface area designed to trap particles between 1 and 10 microns, with rated capture down to 5 microns. The electrostatic charge generated within the synthetic non-woven fibers attracts airborne dust, pollen, and shop allergens without creating excessive static backpressure on the blower motor. This makes it an ideal mechanical upgrade for smaller home shops and professional studios running legacy ceiling units that require dependable allergen reduction and dust management.

Maintenance is straightforward: the slide-in panel can be rinsed clean with water to dislodge accumulated sawdust, swarf, and shop debris, completely eliminating recurring disposable filter replacements. Weighed at 1.2 pounds, the rigid metal frame resists warping under high intake air velocities. The product is backed by JET’s 90-day warranty against manufacturing defects, ensuring dependable mechanical tolerances and seamless compatibility with existing AFS-1000 equipment.

• Direct slide-in compatibility with JET AFS-1000B and AFS-1000C systems
• High-efficiency MERV 11 rated non-woven pleated polyester media
• Sturdy galvanized sheet metal frame construction weighing 1.2 pounds
• Washable reusable design capturing particulate down to 5 microns