Greenworks 60V Pole Saw Spec Breakdown and Lineup Comparison

Best for: Heavy-duty high-speed branch pruning

Pros

• 43 ft/s chain speed
• 15-degree angled head
• 40-minute rapid recharge

Cons

• 1-pound total tool weight
• Battery limited to 60V platform

The Greenworks 60V 10 in Electric Pole provides serious pruning performance driven by a brushless motor engineered to deliver the fade-free cutting authority of a 21cc gas engine. Operating at 6,823 rpm with an impressive chain speed of 43 ft/s, it slices cleanly through dense limbs without the bogging common in lower-voltage models. If you already run a greenworks 60v lawn mower, sharing the included 2.0 Ah lithium-ion pack across tools creates an efficient, zero-emission yard care system that recharges in just 40 minutes with the supplied rapid charger.

Physical reach is managed by a three-piece aluminum shaft that extends up to 9 feet, yielding a total working reach of roughly 14.5 feet depending on user height. Greenworks sets the 10-inch guide bar at a 15-degree pitch, which improves operator sightlines and natural levering when undercutting branches. The tool weighs 12.1 pounds, but the included shoulder strap, push-button electronic start, variable speed trigger, and translucent chain oil tank make it manageable during extensive canopy clearing sessions yielding up to 120 cuts per charge.

• Brushless motor produces 43 ft/s chain speed and 6,823 rpm equivalent to 21cc gas
• Three-piece aluminum pole extends to 9 feet for a working reach of up to 14.5 feet
• Angled 15-degree cutting head provides clean sightlines and improved leverage
• Includes 2.0 Ah 60V battery with 40-minute rapid charger, scabbard, wrench, and shoulder strap

Best for: Existing Greenworks 40V battery owners

Pros

• Bare tool eliminates duplicate batteries
• Low-kickback 3/8-inch LP chain
• Translucent oil reservoir

Cons

• Battery and charger not included
• 11-foot reach is shorter than 60V

Best for: Multi-purpose 40V trimming and pruning

Pros

• 2-in-1 pole saw and hedge trimmer
• 7-position articulating trimmer head
• Broad 40V tool compatibility

Cons

• Smaller 8-inch cutting bar
• Slower cutting on thick branches

The Greenworks 40V 8 in Pole Saw (model PSPH40B210) is designed as a dual-function maintenance system for homeowners managing both tree limbs and elevated perimeter greenery. Packed as a versatile combo kit, this tool includes an 8-inch pole saw attachment alongside a 20-inch dual-action hedge trimmer head. The hedge attachment features a 7-position pivoting head that articulates through multiple angles, making flat-top shaping on tall hedges possible without unstable ladder positioning.

Homeowners managing suburban properties alongside a Greenworks lawn mower will appreciate the shared 40V battery footprint. At 11 pounds, the tool remains reasonably balanced overhead. Maintenance is kept straightforward through an automatic oiler that continuously lubricates the bar and chain, while the easy-adjust tensioning mechanism allows quick chain adjustments using simple mechanical tensioners. Powered by an included 2.0 Ah battery and charger, it fits into the broader 40V ecosystem of over 25 outdoor tools.

• Two-in-one combo kit includes 8-inch pole saw head and 20-inch dual-action hedge trimmer
• Seven-position pivoting hedge trimmer head adapts to angled shaping tasks
• Automatic chain oiling mechanism ensures continuous lubrication during active cuts
• Easy-adjust chain tensioning system simplifies maintenance in the yard

Best for: Commercial-grade torque and low weight

Pros

• 8 HP brushless motor
• Lightweight 9.9-pound build
• Tool-free chain tensioning

Cons

• Restricted to 80V battery system
• Higher voltage packs add bulk

Operating on the brand’s commercial-grade battery architecture, the Greenworks 80V 10 in Electric Pole (model PS80L212) delivers heavy-duty cutting force with a brushless motor rated at 2.8 horsepower. This brushless motor configuration produces twice the torque of entry-level brushed designs, prolonging motor longevity while keeping operational noise and vibration to a minimum. The powerhead drives a 10-inch bar using a fine 1/4-inch pitch chain designed for smooth, splinter-free cuts across up to 83 cycles on a single charge.

Despite its heavy-voltage battery platform, the complete assembly weighs just 9.9 pounds, making it noticeably lighter than the 60V model. The pole shaft extends over 9 feet to offer a practical cutting reach of 14 feet. It features tool-free chain tensioning for fast, manual slack removal without loose screnches, an automatic bar oiler, and a translucent reservoir for real-time fluid checks. The included 80V 2.0 Ah battery and rapid charger integrate seamlessly with more than 75 commercial-oriented 80V tools.

• High-output 80V brushless motor generates 2.8 horsepower and double the operational torque
• Ten-inch bar with 1/4-inch chain pitch delivers up to 83 cuts per battery charge
• Low overall weight of 9.9 pounds reduces user fatigue during overhead trimming
• Tool-free chain tensioning system and translucent oil tank provide rapid adjustments

Best for: Budget-conscious high-reach yard shaping

Pros

• 10-foot pole saw reach
• Convenient 30W Type-C charging
• Includes 20-inch hedge trimmer head

Cons

• Limited to 31 cuts per charge
• Lower chain speed of 26.3 ft/s

The Greenworks 24V 8 in Pole Saw (model CKPH321) proves that lower-voltage systems can tackle complex landscaping needs when packaged with intelligent attachments. This 2-in-1 combo pairs an 8-inch pole pruner with an articulating 20-inch hedge trimmer head. The pole saw produces a respectable chain speed of 26.3 ft/s, delivering up to 31 clean cuts through 4×4 lumber on a single 2.0 Ah battery charge, offering roughly 20 percent more operational power than standard 20V entry-level garden equipment.

Where this setup shines is structural modularity. Built with a three-piece aluminum shaft, the saw configuration extends out to 10 feet of pole length, whereas the hedge trimmer configuration reaches 8.9 feet. The hedge attachment features a 6-position articulated head with 112.5 degrees of pivot alongside a 3,000 strokes-per-minute cutting rate capable of severing 1.2-inch woody stems. Recharging is handled via a 30W Type-C charging adapter that completely restores the 24V pack in 60 minutes, tying directly into an ecosystem of over 200 compatible Greenworks 24V power tools.

• Three-piece aluminum shaft extends up to 10 feet for pole sawing and 8.9 feet for hedge trimming
• Saw delivers 26.3 ft/s chain speed for up to 31 cuts on 4×4 lumber per charge
• Dual-action 20-inch trimmer head articulates across 6 positions with 112.5 degrees of adjustment
• Modern 30W Type-C charging system provides full battery replenishment in 60 minutes

For gardeners who have already invested in 40V batteries, the Greenworks 40V 8 inch Cordless Pole (model PS40B00) offers an efficient, tool-only path to overhead tree trimming. Stripped of bundled batteries and chargers, this dedicated pole saw focuses strictly on reliable limb removal. It uses an 8-inch bar fitted with a 3/8-inch low-profile chain featuring a .050-inch gauge and 33 drive links. This specific chain geometry ensures low kickback characteristics while cutting smaller diameter hardwood limbs and storm debris.

The tool is driven by a 1.0 horsepower electric motor powered by your existing 40V lithium-ion pack. The 40V architecture is one of the brand’s broadest lineups, powering everything from string trimmers to a greenworks cordless pressure washer. Mechanically, the tool features a three-piece aluminum shaft that adjusts from an 8-foot baseline to a 9-foot assembled length, creating an effective working reach of 11 feet. It also integrates an automatic chain oiler, a translucent oil window, and tool-less tensioning for straightforward field maintenance.

• Bare-tool configuration allows direct integration with existing 40V batteries and chargers
• Eight-inch bar equipped with 3/8-inch LP low-kickback chain (.050-inch gauge, 33 drive links)
• Three-piece aluminum shaft extends from 8 feet to 9 feet for an 11-foot working reach
• Translucent oil reservoir and automatic oiler ensure steady chain lubrication

Best for: Thick limb cutting plus hedge maintenance

Pros

• Larger 10-inch pruner bar capacity
• Includes 7-position hedge trimmer
• Compatible with all 40V batteries

Cons

• Heavier 17.2-pound shipping weight
• Bulkier dual-head kit storage

Stepping up in bar capacity on the 40V line, the Greenworks 40V 10 in Pole Saw (model PSPH40L2510) provides an extended 10-inch guide bar paired with a 20-inch hedge trimmer module in a dual-purpose kit. The larger 10-inch bar geometry allows operators to fell branches up to 8 or 9 inches in diameter without needing double-sided relief cuts. This makes it particularly effective for post-storm property cleanup where limbs exceed the capacity of common 8-inch pruners.

The swap-on hedge trimming head matches the capabilities of commercial hedge units, featuring dual-action reciprocal blades and a 7-position pivoting neck for precise leveling across top growth. At an assembled kit shipping weight of 17.2 pounds, it represents a substantial yard tool setup built for structural rigidity. The pole saw component includes automatic bar lubrication and an easy-adjust chain tensioner, running on the 40V lithium-ion platform that accommodates battery capacities from 2.0 Ah up to 6.0 Ah.

• Ten-inch bar and chain setup accommodates thicker tree limbs up to 9 inches in diameter
• Includes interchangeable 20-inch dual-action hedge trimmer with 7-position head
• Compatible with the entire Greenworks 40V battery family from 2.0 Ah to 6.0 Ah capacities
• Equipped with automatic bar oiling system and easy-adjust chain tensioning dial