Frigidaire Dishwasher Filter Breakdown: OEM vs Compatible Parts

Best for: Modern FFBD and FFCD chassis series

Pros

• Extensive verified model compatibility list
• Durable ABS with chrome finish accent
• Lightweight 1.6-ounce design

Cons

• Listing does not specify warranty duration

Best for: Multi-brand older dishwasher tub replacements

Pros

• Durable ABS wear-resistant construction
• Broad cross-brand compatibility
• Replaces legacy part number 154252401

Cons

• Listing dimensions state minimal footprint

The 5304506525 Dishwasher Filter Compatible with Frigidaire is manufactured by ulapithi as a direct aftermarket replacement for the primary wash tub screen found in Frigidaire and associated appliance lines. Built from rigid ABS plastic, this component functions as a frontline barrier against solid food waste, capturing debris during active wash cycles to keep particles from entering the recirculation plumbing or choking the pump discharge. Replacing a clogged or compromised unit resolves common hydraulic issues, including persistent standing water in the tub basin, foul odors trapped in old grease deposits, and wash cycle grinding noises caused by debris slipping past compromised seams. Proper water treatment and detergent performance, such as pairing wash cycles with quality ecover dishwasher tablets, helps these fine mesh assemblies stay free of calcium film over time.

This 5304506525 dishwasher filter suits homeowners seeking a targeted fix for legacy Frigidaire, Kenmore, Gibson, Crosley, Kelvinator, Tappan, and White Westinghouse dishwashers without sourcing branded factory packaging. It directly replaces established industry part numbers including 5304506525, 4456337, AP6036340, PS11770489, 154252401, and EAP11770489. With an item weight of 3.2 ounces, it provides a stable physical footprint, though the listing specifies minimal overall dimensions of 0.1 x 0.1 x 0.1 inches. The manufacturer recommends routine manual rinsing and suggests replacing the assembly every 6 to 12 months depending on household dishwashing frequency, backed by a 1-year warranty.

Readers seeking guaranteed genuine factory-certified parts will find that this aftermarket unit gives way to the OEM Frigidaire Filter (part 5304506525), which provides authentic factory lineage for purists. However, for everyday maintenance where functional filtration and broad cross-brand fit are paramount, this compatible unit serves as a dependable drop-in choice.

• ABS plastic construction designed for wear resistance and resistance to high-temperature deformation
• Replaces multiple legacy numbers including 4456337, AP6036340, PS11770489, 154252401, and EAP11770489
• Broad appliance compatibility across Frigidaire, Kenmore, Crosley, Gibson, Kelvinator, and White Westinghouse
• Includes manufacturer 1-year warranty coverage against manufacturing defects

Best for: Frigidaire Gallery 24-inch built-in dishwashers

Pros

• Tool-free drop-in installation
• Generous 3-year manufacturer warranty
• Impact-resistant ABS plastic

Cons

• Incompatible with flat tub base assemblies

Engineered by AIFACAICAI specifically for cylindrical sump basins, the A00201409 Drain Filter for Frigidaire Electrolux functions as the fine-mesh drain cup that twists directly into the floor of 24-inch built-in dishwashers. Unlike flat broad-tub screens, this cylindrical filter cup concentrates filtration directly above the drain intake, trapping small food particulate, seeds, and grit before wastewater encounters the drain pump impeller. The listing highlights tool-free replacement, allowing users to unlock the old cup by hand and lock this unit into the sump floor during standard preventative maintenance.

This model suits owners of modern Frigidaire Gallery, Electrolux, and Crosley 24-inch platforms who require a dedicated frigidaire dishwasher drain filter replacement. Verified compatible models span FGID2474QF, FGID2474QB, FGID2474QW, FGCD2456QF, FGCD2456QB, FPID2495QF, FPID2497RF, LGID2475QF, E24ID74QPS, EI24ID30Q, and EI24ID50Q, along with extended series like FDSH4501AS, FGID2476SF, and PDSH4816AF. Constructed from high-strength ABS plastic to avoid cracking or thermal warping, the unit measures 5.52 inches deep, 3.35 inches wide, and 5.52 inches high, supported by a manufacturer warranty of 3 years.

While exceptional for Gallery and Electrolux central drain cups, this A00201409 drain filter does not replace flat tub base screens. Shoppers working with older sump designs requiring wide perimeter screens must look toward models like the 5304506525 or 5304506533 assemblies instead.

• Direct replacement for part A00201409 across Frigidaire Gallery, Crosley, and Electrolux 24-inch dishwashers
• Impact-resistant ABS plastic construction designed to resist cracking under repeated thermal cycles
• Tool-free drop-in installation engineered for routine cleaning and rapid replacement
• Comprehensive 3-year manufacturer warranty for extended reliability

The genuine OEM Frigidaire 5304506533 Dishwasher Filter represents the official manufacturer specification for lower basin filtration. Engineered directly by Frigidaire, this authentic grey filter base captures circulating food particles and suspended debris from wash water before they reach the main drain channel. Choosing an authentic factory part ensures exact dimensional alignment with the spray arm support and tub bottom molding, eliminating bypassing where coarse debris might escape through loose tolerances and foul the recirculation pump.

This 5304506533 dishwasher filter is ideal for appliance owners who demand genuine factory-engineered components rather than third-party reproductions. Weighing 2.39 ounces with catalog dimensions of 6 x 6 x 8 inches, this frigidaire OEM filter replacement serves as the direct factory supersession for an extensive catalog of retired part numbers: 154252201, 154252301, 154252302, 154332601, 154332602, 154758901, 154775401, 154775402, and 154776101. Compatible platforms explicitly verified in the listing data include LFID2422RF4B, 58714012414B, 58714013415B, 58714019414B, CDB350NB7B, and CDB350NW7B. Just as appliance owners monitor pure water delivery by updating a frigidaire water filter for fridge, maintaining an OEM dishwasher filter keeps internal hydraulics operating at peak mechanical efficiency.

Where this original part gives way is purely on availability and aftermarket alternatives. For shoppers seeking an alternative third-party version of the exact same 5304506533 base design, compatible alternatives from ulapithi provide an identical functional form factor.

• Genuine Frigidaire OEM factory component engineered to original equipment tolerances
• Direct supersession for nine legacy part numbers including 154252201, 154332601, and 154775401
• Molded grey plastic structure engineered to prevent wash drain clogs and pump fouling
• Verified fit for LFID2422RF4B, CDB350 series, and 587-prefix dishwasher chassis

Best for: Budget-friendly 5304506533 base replacement

Pros

• Direct alternative to part 5304506533
• Broad fit across Westinghouse and Gibson
• Backed by 1-year warranty coverage

Cons

• Requires careful visual check of connection points

The 5304506533 Dishwasher Filter Base Compatible from manufacturer ulapithi serves as a direct-fit aftermarket equivalent to the standard factory filter base. Designed to sit at the base of the wash tub, this unit provides the foundational filtration surface that intercepts larger food residues and kitchen debris. By preventing waste from choking the primary drain line, this 5304506533 filter base directly resolves complaints regarding sluggish tub drainage, degraded spray arm water pressure, foul sump odors, and minor tub leaking caused by standing water backups.

This model fits users seeking an alternative to the OEM 5304506533 part while preserving compatibility across Frigidaire, Westinghouse, Kenmore, Gibson, Kelvinator, and Electrolux platforms. It cross-references an identical list of legacy numbers, including 154252201, 154252301, 154252302, 154332601, 154332602, 154758901, 154775401, 154775402, 154776101, and AP6036341. The assembly weighs 2.99 ounces, lists catalog dimensions of 0.08 x 0.1 x 0.1 inches, and carries a 1-year manufacturer warranty. The listing explicitly instructs buyers to inspect their existing filter dimensions, physical geometry, and mounting points before purchasing to ensure seamless alignment.

This aftermarket base yields to the genuine OEM 5304506533 filter for buyers who insist on manufacturer-branded factory parts, but remains a dependable option when rapid replacement of a deformed or cracked base is needed.

• Aftermarket replacement for part numbers 5304506533, AP6036341, and 154775401 series
• Wear-resistant material engineered to withstand demanding daily water cycles and detergent exposure
• Cross-compatible across Frigidaire, Electrolux, Kenmore, Westinghouse, and Gibson machines
• Backed by a 1-year manufacturer warranty covering operational defects

Best for: Genuine domestic OEM screen replacements

Pros

• Official Frigidaire factory replacement part
• Manufactured in the United States
• Guaranteed fit for part number 5304506525

Cons

• Listing lacks detailed compatibility model list

The Frigidaire Filter is an authentic, genuine Frigidaire replacement part bearing model number 5304506525. Manufactured in the United States, this component delivers original factory tooling for the broad lower tub filter screen. In Frigidaire wash systems, the 5304506525 dishwasher filter acts as the lower horizontal screen separating the upper washing chamber from the lower collection well, ensuring recirculated water remains free of circulating soil that could coat glassware.

This filter directly suits homeowners and appliance technicians seeking an uncompromised OEM replacement where exact polymer thickness, latching clip tension, and mesh uniformity match the factory floor standard. Unlike third-party reproductions, this original assembly guarantees alignment with Frigidaire molded tub ribs and drainage wells. The unit carries an item weight of 3.52 ounces and package dimensions of 14.68 x 12.68 x 2.24 inches, reflecting the full-size shipping packaging required to protect the flat filter frame from twisting in transit. Homeowners who maintain strict standards for their appliances—whether servicing a frigidaire wall air conditioner or servicing kitchen dishwashers—often prioritize these genuine manufacturer parts.

Because this genuine OEM listing does not include extended promotional third-party warranty periods, buyers looking for multi-year warranty terms or lower-cost aftermarket packaging may lean toward third-party alternatives, though they forfeit the factory-certified pedigree of this domestic Frigidaire part.

• Authentic Frigidaire genuine replacement part carrying official model number 5304506525
• Manufactured in the United States under strict factory production specifications
• Full-size tub screen measuring 14.68 x 12.68 x 2.24 inches in shipping package
• Engineered for precise seat retention without water bypass in Frigidaire wash tubs

The 5304506525 Dishwasher Filter Replacement Fit from RUB0B0SHOP offers a specialized aftermarket solution engineered to match part 5304506525 (AP6036340). Built from durable ABS material with a black body and chrome finish styling notes, this frigidaire dishwasher mesh filter captures food waste, grease gunk, and particulate matter before it reaches internal plumbing lines. Maintaining a clear screen directly addresses issues like restricted drainage, leftover grime on dinnerware, and wash pump strain.

This replacement screen is particularly suitable for owners of specific modern Frigidaire and Kelvinator series models. The manufacturer listing provides an extensive catalog of verified compatible dishwasher chassis numbers, including FBD2400KB0, FBD2400KW0, FBD2400LB0, FBD2400LW0, FFBD2404NS0, FFBD2405NB0, FFBD2406NW0, FFCD2413UB0, FFCD2413US0, FFCD2418UW0, FFCD2418UB0, FFID2426TD0, FFID2426TS0, FFID2426TW0, LFID2426TF0, LFID2426TS0, LFBD2409LB0, and LFBD2409LW0. It directly replaces industry part numbers 4456337, AP6036340, PS11770489, and EAP11770489.

With a lightweight profile of 1.6 ounces and listed item dimensions of 1″D x 0.5″W x 1″H, this single-pack component installs into matching tub recesses. Where it concedes to other options is in warranty length, as the listing does not specify an explicit warranty duration, unlike the 1-year or 3-year guarantees offered on competing third-party models.

• Direct replacement for part 5304506525, AP6036340, 4456337, and PS11770489
• Verified fit across popular chassis series including FFBD2404, FFCD2413, and FFID2426
• Constructed from ABS material with wear-resistant and deformation-resistant properties
• Lightweight 1.6-ounce design engineered to avoid blocking drainage pipes