Aiper Above Ground Pool Vacuum Robot Comparison: Technical Specs & Performance

Best for: Pools needing verified 34Wh battery capacity

Pros

• 34Wh 3-cell battery pack
• Dual-cleaning power options
• Audio alert parking system
• Lightweight 190g battery

Cons

• Suction GPH unlisted in specs

Best for: Flat-bottom pools needing dual cleaning modes

Pros

• Dual-cleaning mode toggle
• Audio alert auto-parking
• Covers up to 860 sq ft
• Tangle-free cordless design

Cons

• Suction GPH unlisted in specs

The 2026 Aiper Scuba SE Cordless Pool (Model Scuba-SEX102) is an autonomous floor cleaner engineered specifically for flat-bottom above-ground basins and flat-floored inground pools up to 860 square feet. Built inside a dark gray and cyan plastic enclosure measuring 13.7 inches long, 13.2 inches wide, and 6.8 inches high, this model uses a single-button control interface to manage operational states. The internal motor drives bottom suction channels designed to trap coarse grit, pine needles, and sunken organic sediment into its onboard collection chamber without requiring connection to a dedicated pool skimmer pump.

A primary technical characteristic of this machine is its selectable dual-cleaning mode setup, allowing operators to switch between standard daily maintenance passes and deeper sediment recovery by pressing the physical top button. The internal power pack delivers up to 90 minutes of continuous cleaning per operating cycle. When the battery cells approach depletion, the integrated smart auto-parking protocol directs the robot toward the perimeter wall, where it emits an audible alert tone through its user experience speaker to notify the pool owner that retrieval is required.

This entry within the aiper scuba se cordless pool vacuum series serves swimming pool owners who require straightforward floor sweeps without complex digital configuration. Because the listing does not specify exact suction flow rate or internal watt-hour capacity for the Scuba-SEX102 variant, pool owners who require documented hydraulic flow numbers should consider models with published gallon-per-hour metrics like the Seagull series.

• Selectable dual-cleaning modes configured via top-mounted push button
• Smart auto-parking navigation accompanied by an intuitive audio alert system
• Coverage footprint rated for flat-bottom pool installations up to 860 square feet
• Continuous 90-minute operational runtime powered by internal lithium battery

The 2026 Aiper Scuba SE Cordless Pool under model number ScubaSE-PRX1 shares exterior form factors with its sister models but provides clear electrical documentation for spec-minded buyers. Housed in an ivory and cyan plastic shell measuring 13.7 by 13.2 by 6.8 inches, this model contains a 3-cell lithium-ion battery array delivering 34 watt-hours of electrical capacity. The battery assembly itself weighs 190 grams, keeping the total chassis mass low to simplify lifting the submerged unit out of the water using a standard pole hook.

Functionally, the ScubaSE-PRX1 delivers up to 90 minutes of floor operation across flat pools up to 860 square feet, relying on dual-cleaning modes to handle variable sediment volumes. The machine moves autonomously across vinyl floors, drawing sand and organic material into its internal containment system. When cleaning ends or voltage drops below operational thresholds, the automated self-parking program maneuvers the robot against the pool wall while sounding its audible status chime to ensure dry retrieval.

This specific iteration suits pool owners who prioritize verified aiper cordless pool robot battery specs over generalized model designations. The 34 watt-hour capacity provides stable electrical reserves for its 90-minute cycle. However, like the alternate 2026 Scuba SE listing, the product specifications omit explicit hydraulic pump flow rates in gallons per hour, leaving high-debris pool owners to look toward models with certified 1200 or 1320 GPH ratings for extreme particulate loads.

• Documented 34 watt-hour lithium-ion energy content using a 3-cell battery configuration
• Lightweight 190-gram battery assembly designed for balanced chassis buoyancy
• Dual-mode mechanical operation for light routine skimming and deep floor sweeps
• Audible alert system combined with perimeter auto-parking for simple dockside retrieval

Best for: Pools requiring verified 1200GPH bottom suction

Pros

• Strong 1200GPH suction motor
• 15-second rapid water drainage
• 2-liter internal canister
• Parks at starting point

Cons

• Long 4-hour recharge time
• Heavier 8.8-pound chassis

The (2024 NEW) AIPER Scuba SE Cordless pool cleaner provides published mechanical performance metrics, led by an internal pump rated at 1200 gallons per hour (GPH). Measuring 13.4 inches long, 13.2 inches wide, and 6.8 inches high with an overall weight of 8.8 pounds, this robot operates via a top-mounted push-button control switch. Its 1200 GPH suction pathway lifts settled silt, sand, and outdoor foliage from vinyl and fiberglass surfaces directly into an integrated 2-liter debris canister.

Electrical power is supplied by a 28.08 watt-hour lithium-ion battery pack containing 3 cells, requiring a 4-hour recharge cycle from a standard household outlet. On a single charge, the cleaner operates for up to 90 minutes across pools measuring up to 860 square feet or 40 feet in linear distance. To ease handling during removal, the machine incorporates an engineered rapid water-purging design that expels 90 percent of its internal water payload within 15 seconds of breaking the water surface.

This 2024 Scuba SE unit is tailored for pool owners seeking documented pump throughput alongside a defined 2-liter containment capacity. While its self-parking function returns the cleaner directly to its launching point once the cleaning cycle concludes, the 4-hour charging requirement is longer than the faster 2.5-hour turnaround found on newer Seagull variations.

• Verified 1200 GPH pump flow rate for continuous suction along flat surfaces
• Dedicated 2-liter internal debris compartment for trapping leaves and fine particles
• Engineered rapid water purge clearing 90 percent of internal liquid in 15 seconds
• Standard 4-hour charging cycle providing 90 minutes of operating runtime

Best for: Round pools needing rapid recharge turnaround

Pros

• Fast 2.5-hour recharge cycle
• Dual-drive motor brushes
• 1200GPH floor suction
• 5-pound load capacity

Cons

• 90-minute operational limit

Best for: High-debris pools needing 1320GPH flow

Pros

• High-output 1320GPH suction
• Integrated chemical dispenser
• Extended 100-minute runtime
• 4-color LED status indicators

Cons

• Flat pool floors only

The 2026 AIPER Seagull SE Cordless Robotic pool vacuum represents an increase in hydraulic intake volume within Aiper above-ground floor line. Finished in silver and cyan, this 7.5-pound unit houses a heavy-duty pump generating 1320 GPH of suction force. Measuring 13.4 inches long, 13.2 inches wide, and 6.8 inches high, the chassis integrates a specialized chemical dispenser compartment that disperses water purification tablets while the machine traverses the pool bottom.

Power delivery centers on an expanded 45 watt-hour lithium battery module comprising 6 lithium-ion cells with an aggregate cell weight of 320 grams. This energy reserve expands operational runtime up to 100 minutes per session on flat-bottom above-ground layouts up to 860 square feet. Diagnostics are communicated via a 4-color LED dashboard that signals standby, active scrubbing, low battery status, and charging states at a glance.

This vacuum suits owners analyzing the aiper scuba se vs seagull se engineering split who need greater hydraulic volume. Comparing aiper 1200gph vs 1320gph systems shows that the extra 120 GPH throughput enhances collection of larger leaf fragments and dense sediment. The automated self-parking mechanism parks the robot against the pool wall upon low battery detection, giving way only to dedicated skimmers when floating debris requires capture.

• High-output 1320 GPH suction rate designed for dense foliage and bottom grit
• Integrated water purification chamber supporting slow-dissolving sanitizing tablets
• 6-cell 45 watt-hour battery system delivering extended 100-minute runtime
• Multi-stage 4-color LED indicator system displaying real-time operational status

The AIPER Seagull SE 2025 Cordless Robotic pool vacuum features an internal dual-drive motor configuration combined with two independent bottom-mounted scrubbing brushes. Finished in a grey and teal exterior, this 7.5-pound unit measures 13.5 inches long, 11 inches wide, and 6.8 inches high. Its twin-motor powertrain generates 1200 GPH of suction performance while agitating settled algae films and stubborn floor dirt in round above-ground pools up to 40 feet in diameter.

Electrical architecture is driven by a 44.4 watt-hour lithium battery pack featuring 6 cells, engineered with rapid-charge circuitry that completes a full recharge in 2.5 hours. This reduced turnaround powers the cleaner for 90 minutes of continuous operation. A three-color LED indicator array monitors active operational stages, while the mechanical chassis supports an internal debris holding capacity rated up to 5 pounds of collected material.

This 2025 machine serves swimming pool owners who require fast turnaround between cleaning cycles, cutting battery charging downtime nearly in half compared to 4-hour models. While the mechanical scrubbing brushes provide strong floor agitation, pool owners seeking 100-minute runtimes or integrated chemical delivery chambers will find those specific features on the 2026 Seagull SE model instead.

• Dual-drive motor system paired with two independent floor scrubbing brushes
• Upgraded power cells achieving a full battery recharge in 2.5 hours
• Documented 44.4 watt-hour 6-cell lithium pack powering 90 minutes of runtime
• Chassis debris payload rating supporting up to 5 pounds of trapped waste

Best for: Continuous 24/7 surface pool skimming

Pros

• 24/7 solar-powered cleaning
• Large 4-liter 150-micron basket
• Built-in 3-inch chlorine dispenser
• Mobile app remote steering

Cons

• No pool floor vacuuming

The AIPER EcoSurfer S2 Solar Pool Skimmer diverges from bottom-crawling vacuums by targeting floating surface debris before it waterlogs and sinks to the floor. Powered by an onboard photovoltaic solar panel paired with a 10.8-volt, 56.16 watt-hour lithium-ion battery containing 6 cells, this floating robot provides 24/7 continuous operation in sunny environments. When solar exposure is limited, a DC charging adapter delivers a full charge that yields up to 35 hours of active surface skimming.

Surface filtration relies on a 150-micron mesh basket with a large 4-liter debris volume, backed by a DebrisGuard anti-leak flap that prevents floating waste from washing back into the pool. The internal bay houses an adjustable chlorine dispenser capable of holding standard 3-inch diameter, 1-inch thick chlorine tablets. This solar-powered surface maintenance setup works effectively alongside thermal equipment like a fafco solar pool heater, keeping the water surface free of heat-blocking leaf mats.

Navigation is driven by dual obstacle avoidance sensors, smart pathing algorithms, and four retractable anti-stranding columns that prevent the chassis from hanging up on shallow ladder steps. Users interact with the skimmer through a mobile smartphone app that controls custom cleaning schedules, manual directional steering, path history, and obstruction alerts. While the EcoSurfer S2 manages surface tension debris across salt and chlorine pools with twin tolerant motors, it does not clean bottom floors, making it a companion unit rather than a direct replacement for an aiper seagull se cordless robotic pool vacuum.

• Photovoltaic solar charging supporting continuous 24/7 surface filtration
• Large 4-liter collection bay featuring fine 150-micron mesh and anti-leak flappers
• Integrated chemical dispenser holding 3-inch diameter chlorine tablets
• Mobile app connectivity offering manual remote steering and cleaning schedules